Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volkswagen
  4. :
  5. Golf
  6. : How to dismantle the cigarette lighter socket and ashtray of the Volkswagen Golf.

Volkswagen Golf - Video tutorial

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Cigarette Lighter
Operation: How to dismantle the cigarette lighter socket and ashtray of the Volkswagen Golf.

Let's briefly see the instructions that will allow us to disassemble the cigarette lighter socket and the ashtray of the Volkswagen Golf, in simple and quick steps. First, we get into the car and start pulling and extracting the ashtray; this way it will be possible to also remove the cigarette lighter socket by disconnecting the electrical connector of the resistor, as shown in the video. At this point, we proceed to replace the cigarette lighter socket with the new one or with a 12 Volt USB socket; then we reassemble the ashtray, applying the reverse process!


Posted on 11 January 2024 by ScegliAuto

    Frequently Asked Questions

    • Golf 1997-2003 - Where is the cigarette lighter fuse located, in the Volkswagen Golf 4? Read Answer
    • Golf 2008-2012 - Where is the cigarette lighter fuse located in the Volkswagen Golf 6? Read Answer
    • Golf 2012-2019 - Where is the cigarette lighter fuse located in the Volkswagen Golf? Read Answer
    • Golf 2008-2012 - Why does the cigarette lighter socket on the Volkswagen Golf no longer work? Read Answer
    • Golf 1997-2003 - Where is the Volkswagen Golf 4 cigarette lighter fuse located? Read Answer
    • Golf 2003-2008 - Why is the cigarette lighter of the Volkswagen Golf 5 not working? Read Answer
    • Golf 2012-2019 - What to do if the cigarette lighter on Volkswagen Golf 7 no longer works? Read Answer
    • Golf 2003-2008 - How to replace the cigarette lighter bulb on Volkswagen Golf 5? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos