Do it yourself
Frequently asked questions about cars and motorcycles

How to disassemble the Volkswagen Golf cigarette lighter

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Cigarette lighter

This short and simple guide will show us the steps on how to disassemble and replace the cigarette lighter socket of the Volkswagen Golf. First of all, we get into the car and start by disconnecting and removing the plastic cover of the ashtray, consequently removing the cigarette lighter socket as well (disconnecting the electrical connector found underneath), as shown in the video. At this point, if necessary, we replace the cigarette lighter socket with a 12V one, then reassemble the socket onto the attachment; finally, we reassemble the ashtray, following the reverse procedure of disassembly!

Posted on 8 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) If the cigarette lighter socket of our Volkswagen Golf has suddenly stopped working, the first thing we can do is check the status of the correspondi…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) The fuse for the cigarette lighter socket on a Volkswagen 5 vehicle is located inside the fuse box behind the passenger side glove compartment. Since…
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Today we will discover the instructions that will allow us to disassemble and replace the cigarette lighter and its socket in the Volkswagen Golf. Fi…

    Frequently Asked Questions

    • Golf 2008-2012 - Why does the cigarette lighter socket on the Volkswagen Golf no longer work? Read answer

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos