Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Service light on the Volkswagen e-Golf?

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Service warning light

To reset the Service light on the Volkswagen e-Golf, press and hold the 0.0 button located in the lower central part of the instrument cluster: while holding this button, insert the ignition key into the ignition switch, ensuring the instrument cluster lights up. After it lights up, continue to hold the button for a few seconds to reset the light; when it disappears from the instrument cluster, you can complete the operation by turning it off.

Updated on 7 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a VW Golf
How to Reset the Service Light on a VW Golf
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) .. to reset the service light on the Volkswagen Golf are the same as those for the Volkswagen Jetta. To reset the service light related to the service.. …
How to reset the Service light on a Volkswagen Golf?
How to reset the Service light on a Volkswagen Golf?
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) .. To reset the Service light on a Volkswagen Golf, press and hold the right button located at the bottom of the instrument cluster. While holding.. …
How do you reset the Service light on the Volkswagen Golf 8?
How do you reset the Service light on the Volkswagen Golf 8?
Volkswagen Golf (2019-2026 / Golf 8, MK 8, Golf Viii) .. shown on the instrument panel of the Volkswagen Golf 8, you will need to turn on the ignition by inserting the ignition key into the corresponding slot:.. …

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos