Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Clips in the Door

Model: Volkswagen Sharan MK 1, 7M - Years 1995-2010
Part: Door trim panel

In this video, replace the clips located in the door of every car. Start by removing the handle. First, take off the panel and unscrew the three screws that secure it. Once the handle is removed, begin disassembling the inner door panel by unscrewing all the screws that hold it in place, then check for any other attachments. Now, pry it off, and the panel will come away easily. After this process, remove all the clips from the door and replace them. Once everything is renewed, simply reassemble everything, and the job is done.

Updated on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Removing the Door Panel
Instructions for Removing the Door Panel
Volkswagen Sharan (1995-2010 / MK 1, 7M) To remove the door panel, first remove the trim moulding of the panel itself (in this case with an aluminium effect finish) and the internal cover of…
Replacement of Door Pressure Sensor
Replacement of Door Pressure Sensor
Volkswagen Sharan (1995-2010 / MK 1, 7M) The safety sensor that prevents someone from being crushed by the sliding door is essential for this car. To replace it, open the door in question an…
How to replace the door of the VW Sharan 2
How to replace the door of the VW Sharan 2
Volkswagen Sharan (2010-2023 / 7N, MK 2) Today we will explain how to replace the sliding door of the Volkswagen Sharan model 2. Open the sliding door and remove the lower side cover so that…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos