Do it yourself
| ||||
|
Volkswagen Id 4 - Video tutorial
Model: Volkswagen Id 4
MK 1
- Years 2020-2024 In this tutorial we can see how to replace the battery of the Volkswagen ID 4 remote control, an extremely simple and fast operation. To do this, we will need a small screwdriver with a flat tip and a replacement battery of type CR2032. First of all, we extract the emergency key by pressing the appropriate button, then we insert the screwdriver into the slot just freed, lever and unlock the rear door. At this point, we remove the old battery, insert the replacement one, respecting the polarity, and follow the reverse procedure.
Posted on 20 April 2024 by ScegliAuto
Other guides that may interest you
|
How do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.060
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |