Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Passat
    4. : How do you replace the timing belt of the Volkswagen Passat?

Volkswagen Passat - Video tutorial

Model: Volkswagen Passat B7 - Years 2010-2014
Part: Timing belt
Operation: How do you replace the timing belt of the Volkswagen Passat?

To replace the timing belt of the Volkswagen Passat, you need to open the hood so that you can access the components located on the left side of the engine. You will also need to loosen the screws that secure the front right wheel and the corresponding fender, so that they can be removed. By doing this, you will have access to the belt tensioner pulley, which must be removed by loosening the central nut. This will allow you to reduce the tension of the belt and replace it with a new one, verifying afterwards that everything is functioning properly.


Posted on 21 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Passat 2014-2023 - At how many kilometers should the timing belt of the Volkswagen Passat B8 be changed? Read Answer
    • Passat 2010-2014 - How often does the timing belt on the Volkswagen Passat need to be changed? Read Answer
    • Passat 2014-2023 - When to replace the timing belt in the Volkswagen Passat 2.0 TDI? Read Answer
    • Passat 2014-2023 - How much does the Volkswagen Passat timing belt cost? Read Answer
    • Passat 2010-2014 - After how many km do you change the timing belt of the Volkswagen Passat b7? Read Answer
    • Passat 2010-2014 - When does the timing belt of a Volkswagen Passat 2.0 TDI need to be replaced? Read Answer
    • Passat 2005-2010 - How much does it cost to change the timing belt of the VW Passat 2.0 TDI? Read Answer
    • Passat 2005-2010 - How much does it cost to replace the timing belt on the VW Passat? Read Answer
    • Passat 2010-2014 - How many km should the VW Passat 2011 timing belt be replaced? Read Answer

How to reset the Jeep Renegade Passive Entry light

The guide shows how to reset the Passive Entry system, stylized by a key shaped light with three lines of WiFi is shown next to the mileage. This system allows the vehicle to be switched on without having to use the supplied keys. The reset must be performed keeping the keys inside the vehicle. In fact, with the instrument panel off, it will be necessary to press the ignition button located on the keys and then the brake pedal. At this point it is necessary to press the power button on the dashboard. At this point, wait five minutes before starting the vehicle normally.

Watch the video!


by ScegliAuto

More videos