Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Door on a Volkswagen Golf

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Car door

See other generations:
Video tutorial

Today, we will look at the steps to remove and replace the entire rear door on a Volkswagen Golf. First, open the rear door and start unscrewing the fixing nuts of the side hinges, then detach the pin from the bracket; next, disconnect the electrical wiring and the rubber tube, as shown in the video.

At this point, hold the door up to facilitate its removal, taking care not to damage the bodywork; then replace it with the new one and reassemble everything, applying the reverse procedure of disassembly!


Updated on 26 September 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Door Panel on the Volkswagen Golf
How to Remove the Rear Door Panel on the Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Let's briefly go through the steps to remove and replace the rear door panel on the Volkswagen Golf. First, open the rear door and start by removing …
How to disassemble the rear door panel of the Volkswagen Golf
How to disassemble the rear door panel of the Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Today's information will show us how to disassemble and replace the rear door panel of the Volkswagen Golf. First, we open the rear door of the car a…
Guide to Removing the Rear Door Panel of the Volkswagen Golf
Guide to Removing the Rear Door Panel of the Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Let’s discover how to remove the rear door panel of the Volkswagen Golf. First, open the rear door and start unscrewing the fastening screws located …

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos