Do it yourself
| ||||
|
Volkswagen Transporter - Video tutorial
Model: Volkswagen Transporter
MK 5, T5
- Years 2003-2014 In this video, we see how, after completing all the operations required for the service of the Volkswagen Transporter, we need to reset the module that alerts us of the need for this intervention with a light on the display. We sit in the driver's seat, press and hold the "ooo/set" button located at the bottom right of the speedometer, turn the ignition key to position two: the request to reset the oil change will appear on the display, which we will confirm with the "ok" button on the right side of the steering wheel, turn off the ignition. Press and hold the hazard button, turn on the ignition and the request to reset the maintenance will appear on the display, which we will confirm with "ok".
Posted on 29 April 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.048
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |