Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Timing Belt on a Volkswagen Polo?

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Timing belt

See other generations:
Video tutorial

To replace the timing belt on a Volkswagen Polo, loosen the screws securing the cover on the top of the engine block, along with the one on the left side. Under this side cover, you will find the belt around the respective pulleys.

Access it by removing the right front wheel and loosening the central nut of the tensioner roller to remove it and insert the new one. Once the new belt is in place, tension it and reassemble all components that were removed.


Updated on 30 September 2026 by ScegliAuto


Related tutorials

Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) In this guide, you will find the main instructions for removing and replacing the timing belt on the Volkswagen Polo 1.4 MPI; for this type of engine…
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) This guide outlines the main steps to remove and replace the timing belt on a Volkswagen Polo with a 1.4 petrol engine. First, lift the vehicle and r…
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) This guide provides the necessary instructions on how and when to replace the timing belt on a Volkswagen Polo 1.2 3-cylinder engine. For this type o…

Other guides you may be interested in

    Frequently Asked Questions

    • Polo 2009-2017 - How much does it cost to replace the timing chain of the Volkswagen Polo 1.2 petrol? Read answer

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos