Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the key shell of the Volkswagen Transporter?

Model: Volkswagen Transporter T5, MK 5 - Years 2003-2014
Part: Key

In order to replace the key shell of the Volkswagen Transporter, you need to press the appropriate button to lift the key, levering it inside its housing: this way, the top part of the key can be detached, thus removing the components inside the device. The coding chip and the battery must be inserted into the new key shell, also repositioning the key at the top. At this point, you will need to close the new key shell, to verify that everything works correctly.

Posted on 13 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Radio from a Volkswagen Transporter T6?
How to Remove the Radio from a Volkswagen Transporter T6?
Volkswagen Transporter (2014-2025 / MK 6, T6) To remove the radio from the Volkswagen Transporter T6, simply follow the instructions in the video and those outlined here. 1) Ensure you have all t…
Where is the fuse box of the Volkswagen Transporter T5 located?
Where is the fuse box of the Volkswagen Transporter T5 located?
Volkswagen Transporter (2003-2014 / T5, MK 5) To locate the fuse box inside the cabin of your Volkswagen Transporter T5, you just need to follow these steps. Once inside the vehicle, make sure it…
How to reset the "Service" light on a Volkswagen Transporter T5?
How to reset the "Service" light on a Volkswagen Transporter T5?
Volkswagen Transporter (2003-2014 / T5, MK 5) To reset the "Service" light on a Volkswagen Transporter T5, start by pressing and holding the button under the instrument panel. While holding the b…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos