Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the "Service" light on a Volkswagen Transporter T5?

Model: Volkswagen Transporter T5, MK 5 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Service warning light

See other generations:
Video tutorial

To reset the "Service" light on a Volkswagen Transporter T5, start by pressing and holding the button under the instrument panel. While holding the button, turn on the instrument panel by turning the ignition key to the "On" or "Acc" position.

Continue to hold the button under the instrument panel for about 5 seconds or until the "Service" light turns off. Once the light has turned off, release the button. The system has now been reset and the "Service" light should have been reset.

Make sure you have followed the steps correctly and refer to the owner's manual of your Volkswagen Transporter T5 for specific instructions or any additional precautions.


Posted on 18 December 2024 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Volkswagen Transporter T6?
How to Reset the "Service" Light on a Volkswagen Transporter T6?
Volkswagen Transporter (2014-2025 / T6, MK 6) Good morning, today’s objective is to reset the "Service" light on your Volkswagen Transporter T6. Start by sitting in the driver’s seat. Then, by pr…
How to reset the Service light on the Volkswagen Transporter?
How to reset the Service light on the Volkswagen Transporter?
Volkswagen Transporter (1990-2003 / MK 4, T4) To reset the Service light on the Volkswagen Transporter, turn on the ignition so you can use the controls on the display: once powered, press and ho…
How to Reset the AdBlue Light on a Volkswagen Transporter?
How to Reset the AdBlue Light on a Volkswagen Transporter?
Volkswagen Transporter (2014-2025 / T6, MK 6) The AdBlue light on the Volkswagen Transporter indicates that the additional fluid in the tank is nearly depleted: therefore, you can reset the light…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos