|
Do it yourself
| |||
| ||||
How to Install a Second Battery in a Volkswagen Transporter T6
Model: Volkswagen Transporter
MK 6, T6
- Years 2014-2025
Here’s how to install a second battery in your Volkswagen Transporter T6: the battery is installed in the space under the passenger seat, in the OEM position, using an anti-vibration metal mounting bracket. The positive red cable is 25 mm² in cross-section, which is adequate, as is the 100 Amp fuse installed near the main battery: for the earth connection, the surface has been scraped for better electrical contact, and the connection has been made correctly to a dedicated point on the chassis. However, a charge separator is missing, so the batteries can discharge each other when the engine is off. The solution is to add a smart relay and a digital voltmeter to monitor both batteries; also, in some critical areas, there are cables that could risk abrasion due to their placement; but this is a problem that can be solved with flexible sheathing.
Posted on 18 February 2026 by ScegliAuto
Video tutorial
Related tutorials
Volkswagen Transporter
(2003-2014 /
T5, MK 5)
The steps to follow to replace the battery of the Volkswagen Transporter key are quite simple to do independently. The first step to take is to inser…
Volkswagen Transporter
(2014-2025 /
MK 6, T6)
If the remote control of your Volkswagen Transporter T6 has stopped working and you want to replace the battery inside it yourself, then all you have…
Volkswagen Transporter
(2014-2025 /
MK 6, T6)
In this guide, you will find a brief and effective procedure to replace the battery in your Volkswagen Transporter T6 remote. First, obtain a small s…
Other guides you may be interested in
|
How to Repair the Key Spring of the Peugeot 207?
Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.161
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |