Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you install the rearview camera of the Volkswagen Jetta?

Model: Volkswagen Jetta MK 5, A5 - Years 2005-2010
Part: Checks and maintenance

In order to install the rear camera of the Volkswagen Jetta, you need to lift the rear hatch so that you can access its internal part after removing the internal protective panel. Once this panel has been removed, you can insert the rear camera into the corresponding housing above the license plate and connect the ground wire to the rear light of the car. The other wire must be covered by the internal linings of the hatch and brought inside the cabin to connect it to the car radio: the wire must be completely covered by the internal panels.

Posted on 14 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to install the rear camera on the Volkswagen Jetta
Volkswagen Jetta (2010-2018 / MK 6, A6) Let's go see the main steps that will allow us to install the rear camera on the Volkswagen Jetta. First, we open the rear hatch of the trunk and sta…
Where are the Fuses Located in a Volkswagen Jetta?
Where are the Fuses Located in a Volkswagen Jetta?
Volkswagen Jetta (2018-2025 / A7, MK 7) Inside the Volkswagen Jetta, all fuses are contained within dedicated fuse boxes installed in the vehicle: in this type of car, you can find two boxe…
Where are the Fuses Located in the Volkswagen Jetta?
Where are the Fuses Located in the Volkswagen Jetta?
Volkswagen Jetta (1991-1998 / MK 3, A3) In the Volkswagen Jetta, the fuse boxes contain the fuses responsible for the operation of the devices installed in the car: in this type of vehicle,…

    Frequently Asked Questions

    • Jetta 1998-2005 - How many liters of automatic transmission oil does a Jetta A4 need? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos