Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Rear Camera on the Volkswagen Jetta

Model: Volkswagen Jetta MK 6, A6 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

See other generations:
This video is currently unavailable

Let’s go through the main steps to install the rear camera on the Volkswagen Jetta. First, open the boot lid and start preparing your camera, securing it correctly in the centre with the kit provided; then run the wiring along the side until you reach the dashboard display, as shown in the video.

At this point, once connected and powered on, adjust the angle of the rear camera correctly, following the video tutorial to the end!


Updated on 26 September 2026 by ScegliAuto


Related tutorials

How to Install the Reversing Camera on the Volkswagen Jetta?
How to Install the Reversing Camera on the Volkswagen Jetta?
Volkswagen Jetta (2005-2010 / MK 5, A5) To install the reversing camera on the Volkswagen Jetta, lift the boot to access the internal part after removing the internal protection panel. Once…
How to Remove the Rear Tailgate of a Volkswagen Jetta
How to Remove the Rear Tailgate of a Volkswagen Jetta
Volkswagen Jetta (2005-2010 / MK 5, A5) Below are the main instructions on how to remove and replace the rear tailgate of the Volkswagen Jetta. First, open the rear tailgate and start remov…
Removing the Rear Light of the Volkswagen Jetta
Removing the Rear Light of the Volkswagen Jetta
Volkswagen Jetta (2005-2010 / MK 5, A5) Let's look at how to remove the rear light of the VW Jetta. Lift the rear hatch and secure it, then remove the fabric cover that protects the boot li…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos