Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to deactivate traction control on the Volkswagen Jetta

Model: Volkswagen Jetta MK 5, A5 - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Dashboard

See other generations:
Video tutorial

To deactivate traction control on a Volkswagen Jetta, start by turning on the instrument panel without starting the engine; activate the hazard lights (4 indicators), then press the brake pedal 5 times in a row until the traction control light comes on the instrument panel; at this point, you can start the engine, put the gearbox in D for automatic vehicles (in first gear for manual vehicles), and try to take off by spinning the wheels while accelerating a bit and releasing the brake pedal for automatic vehicles (release the clutch pedal for manual vehicles).


Updated on 13 August 2026 by ScegliAuto


Related tutorials

Installing Traction Control Activation Button
Installing Traction Control Activation Button
Volkswagen Jetta (2010-2018 / MK 6, A6) Unfortunately, Volkswagen did not equip the vehicle with a button to activate and deactivate the traction control system (TCS). Fortunately, the vehi…
How to deactivate the Lane Assist system in the Volkswagen Jetta?
How to deactivate the Lane Assist system in the Volkswagen Jetta?
Volkswagen Jetta (2018-2025 / A7, MK 7) In this tutorial, we will see how to disable the Lane Assist system in the Volkswagen Jetta, a very simple and quick operation, for example, if we fi…
How to use Cruise Control in the Volkswagen Jetta?
How to use Cruise Control in the Volkswagen Jetta?
Volkswagen Jetta (2010-2018 / MK 6, A6) In this tutorial we can see how to use the Cruise Control in the Volkswagen Jetta, an extremely simple operation. This system should only be used on …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos