Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the antenna of the VAG car group

Model: Volkswagen Volkswagen Various
Part: Antenna

To replace the external antenna in VAG group cars, unscrew the rod leaving the base, open the rear hatch, release the trim at the end of the roof rail and lower it just enough to unscrew the nut at the base of the antenna: it is recommended not to overdo it to avoid creating permanent creases. Once the nut is removed, disconnect the cable connector and remove the antenna housing from the roof, insert the cable of the new base and position it, tighten the nut from below, connect the connector, put back the roof rail and insert the trim, close the hatch and screw the rod back in.

Posted on 22 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the Pumpe Duse injection system of a VAG TDI group vehicle
How to replace the Pumpe Duse injection system of a VAG TDI group vehicle
Volkswagen Volkswagen Various In this video, we will see how to replace the Pumpe Duse injection system of a TDI from the VAG group. In this system, each injector has its own inte…
How to change the battery and the case of a VAG group key
How to change the battery and the case of a VAG group key
Volkswagen Volkswagen Various In this video, we will see how to change the battery and the casing of a key, generally from the VAG group: we will need a crosshead screwdriver to r…
Risks of removing active components on VAG group cars.
Risks of removing active components on VAG group cars.
Volkswagen Volkswagen Various In this video we can see how, by changing the modules and removing the protections from the on-board computer, even through the VCDS system, we may l…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos