Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Antennas from Volkswagen Cars

Model: Volkswagen Volkswagen Various
Part: Antenna

Video tutorial

Changing the antenna on a car is quite simple, as the video shows. First, unscrew the antenna from the roof.

Then, start working on the interior by gently removing the upper trim that secures the roof lining. Using a flathead screwdriver, bend the tabs of the clips that hold the lining in place, being careful not to break them.

Lower the seatbelt regulator. Once done, remove the rear panels (boot side).

Finally, you can access the roof lining and uncover the electrical part where the antenna is secured with wiring. Disconnect the antenna connection cable, remove the bolt securing the antenna base, and if necessary, you can also remove the ceiling handles.

Once the bolt is removed, you can finally take off the antenna base.


Updated on 10 March 2026 by ScegliAuto


Related tutorials

How to Fix the Immobiliser in Volkswagen Cars?
How to Fix the Immobiliser in Volkswagen Cars?
Volkswagen Volkswagen Various In today's video, you will see how to fix the immobiliser device in Volkswagen cars and other vehicles from the group, namely Skoda, Seat, and Audi. …
How to Disable Component Protection in Volkswagen Cars?
How to Disable Component Protection in Volkswagen Cars?
Volkswagen Volkswagen Various It should be noted that the attached tutorial video was made while performing the specified technical intervention on an Audi vehicle, but it also pe…
Illuminated Emblem for Volkswagen Cars
Illuminated Emblem for Volkswagen Cars
Volkswagen Volkswagen Various In this video, you will learn how to install an illuminated emblem for Volkswagen cars. However, this is not suitable for all Volkswagen owners. Firs…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos