Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Volkswagen Volkswagen Various - Thermostat

Thermostat Volkswagen Volkswagen Various ( / )

Volkswagen Volkswagen Various
How to replace the thermostat on a Volkswagen vehicle
Replacing the thermostat on a Volkswagen vehicle may seem like a complex operation, but with the help of our video tutorial and written guide, you will be able …Read all…
Posted on 6 August 2024 by ScegliAuto
Volkswagen Volkswagen Various
How to Remove the Thermostat from a Volkswagen Transporter
Before you can start, open the front bonnet of your Volkswagen Transporter. Begin by removing the entire air filter assembly and the associated hoses. At this …Read all…
Posted on 6 May 2026 by ScegliAuto
Airbag (5) Antenna (2) Air conditioning (1) Car stereo (28) Battery (1) Air vents (1) Transmission (5) Body (3) Control unit (1) Wheel rim (1) Key (47) Timing belt (2) Air conditioner (4) A/C controls (1) Onboard computer (15) Checks and maintenance (37) Dashboard (2) Differential (1) Headlight (1) Air filter (1) Cabin air filter (2) Parking brake (2) Fuel injectors (2) Headlight bulb (1) Handle (2) Engine (6) Clock (6) Door trim panel (1) Brake pads (1) Tires (1) Shift knob (1) Pump (4) Power window switch (2) Instrument cluster (7) Wheel (1) Fuse box (8) Seat (4) Parking sensors (1) Oxygen sensor (1) Side mirror (1) Rearview mirror (1) AdBlue warning light (9) Warning light – error code (38) (7) Tire pressure warning light (4) Service warning light (4) Manufacturer emblem (1) Fuel cap (2) Windshield wipers (1) Thermostat (2) Turbocharger (1) Side window (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos