Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Volkswagen Volkswagen Various - Antenna

Antenna Volkswagen Volkswagen Various ( / )

Volkswagen Volkswagen Various
Replacement of the antenna of the VAG car group
To replace the external antenna in VAG group cars, unscrew the rod leaving the base, open the rear hatch, release the trim at the end of the roof rail and …Read all…
Posted on 22 July 2024 by ScegliAuto
Volkswagen Volkswagen Various
How to Remove the Antennas from Volkswagen Cars
Changing the antenna on a car is quite simple, as the video shows. First, unscrew the antenna from the roof. Then, start working on the interior by gently …Read all…
Posted on 29 March 2026 by ScegliAuto
Airbag (5) Antenna (2) Air conditioning (1) Car stereo (28) Battery (1) Air vents (1) Transmission (5) Body (3) Control unit (1) Wheel rim (1) Key (47) Timing belt (2) Air conditioner (4) A/C controls (1) Onboard computer (15) Checks and maintenance (37) Dashboard (2) Differential (1) Headlight (1) Air filter (1) Cabin air filter (2) Parking brake (2) Fuel injectors (2) Headlight bulb (1) Handle (2) Engine (6) Clock (6) Door trim panel (1) Brake pads (1) Tires (1) Shift knob (1) Pump (4) Power window switch (2) Instrument cluster (7) Wheel (1) Fuse box (8) Seat (4) Parking sensors (1) Oxygen sensor (1) Side mirror (1) Rearview mirror (1) AdBlue warning light (9) Warning light – error code (38) (7) Tire pressure warning light (4) Service warning light (4) Manufacturer emblem (1) Fuel cap (2) Windshield wipers (1) Thermostat (2) Turbocharger (1) Side window (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos