Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volvo
  4. :
  5. S40
  6. : Side turn signal light bulb

Volvo S40 - Side turn signal light bulb

Volvo S40 (1995-2004 / MK 1)
Side turn signal bulb replacement

The signal lamps, in a car, are very important so it is always advisable to carry out a check. Should the light of a direction indicator burn out, it should be …read all…
Posted on 13 July 2023 by ScegliAuto
Volvo S40 (1995-2004 / MK 1)
How to replace the rear bumper arrow bulb

The following video shows how to replace the bulb of the side indicator located on the rear light block of a Volvo S40. The operation is easier if the rear …read all…
Posted on 8 July 2023 by ScegliAuto
Volvo S40 (1995-2004 / MK 1)
Replacement of the side indicator light bulb

Open the front hood and make sure it is supported safely. The side indicator light is fixed with a screw located in the corner between the light and the …read all…
Posted on 4 July 2023 by ScegliAuto

Loudspeaker (3) Shock absorbers (1) Car stereo (7) Battery (2) Air Vents (2) Bushings (1) Spark plugs (1) Bodywork (2) Key (2) Timing belt (3) V-belt (1) Air conditioning controls (1) -board computer (1) Checks and maintenance (12) Dashboard (6) Headlight (3) Tail light (1) Air filter (1) Cabin air filter (2) Diesel filter (1) Oil filter (1) Grille (1) Accessory Kit (3) Light bulb (5) Side turn signal light bulb (3) Headlight bulb (2) Rear light bulb (3) Interior lights ceiling light bulb (5) Antifreeze liquid (2) Dashboard light (1) License plate light (1) Handle (1) Engine oil (3) Door panel (3) Front bumper (1) Rear bumper (1) Brake pads (1) Hydraulic pistons (2) Gear Shift Knob (2) Instrument cluster (3) Passenger compartment heating radiator (1) Fuse box (4) Seat (2) Outside rearview mirror (5) Windscreen wipers (2) Thermostat (1) Central tunnel (1) Interior blower (1)

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos