Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Bumper Indicator Bulb

Model: Volvo S40 MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Side marker bulb

See other generations:
Video tutorial

The following video shows how to replace the bulb of the side indicator located on the rear light cluster of a Volvo S40. The operation is easier if the rear wheel is removed. Using a ratchet spanner, remove the bolts securing the panel near the wheel arch.

This will create a gap allowing you to access the indicator light. Push it out by pressing on the side clip that holds it in place.

Once the indicator is removed, disconnect it and replace it (or just replace the bulb). After completing the operation, reinsert the indicator light into its housing.


Updated on 5 February 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper on a Volvo V40
Volvo S40 (2004-2012 / MK 2) Is the rear bumper of your Volvo V40 broken? Do you want to replace it? Here’s how to remove it from the back of the car. Open the boot lid, unscrew …
Replacing Side Indicator Bulb
Replacing Side Indicator Bulb
Volvo S40 (1995-2004 / MK 1) Open the front bonnet and ensure it is securely supported. The side indicator is secured with a screw located at the edge between the indicator and t…
Replacing the Rear Light Bulb
Replacing the Rear Light Bulb
Volvo S40 (1995-2004 / MK 1) A blown bulb can result in a fine, so it is advisable to replace it immediately. To replace the rear light bulb, simply open the access flap located …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos