Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Side Indicator Bulb

Model: Volvo S40 MK 1 - Years 1995-2004
Part: Side marker bulb

The signal lamps on a car are very important, so it is advisable to always check them. If the light of an indicator is burnt out, it is best to replace it immediately. The operation is very simple and easily executable. Remove the plastic cover of the indicator with your hands or a small plastic tool by pulling it outwards. Disconnect the bulb from the connector, remove the burnt bulb, and replace it with a new one, ensuring it is the same model. The specifications of the bulb are stamped on its body, indicating the voltage and wattage. Refit the lens, ensuring it is secure, and test the lamp.

Updated on 7 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Side Indicator Bulb
Replacing Side Indicator Bulb
Volvo S40 (1995-2004 / MK 1) Open the front bonnet and ensure it is securely supported. The side indicator is secured with a screw located at the edge between the indicator and t…
Replacing the Rear Light Bulb
Replacing the Rear Light Bulb
Volvo S40 (1995-2004 / MK 1) A blown bulb can result in a fine, so it is advisable to replace it immediately. To replace the rear light bulb, simply open the access flap located …
How to Replace the Rear Bumper Indicator Bulb
How to Replace the Rear Bumper Indicator Bulb
Volvo S40 (1995-2004 / MK 1) The following video shows how to replace the bulb of the side indicator located on the rear light cluster of a Volvo S40. The operation is easier if …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos