Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. S40
    4. : Hydraulic pistons

Volvo S40 - Hydraulic pistons

Volvo S40 (1995-2004 / MK 1)
Front hood support piston replacement
If it happens that once the front hood is opened it tends to fall then it means that the support piston has lost the ability to support it and must be …read all…
Posted on 18 August 2023 by ScegliAuto
Volvo S40 (1995-2004 / MK 1)
Rear bonnet support pistons replacement
The support pistons of the rear bonnet are actually gas springs and allow you to maneuver the opening and closing of the bonnet, giving a push in the opening …read all…
Posted on 9 August 2023 by ScegliAuto
Loudspeaker (3) Shock absorbers (1) Car stereo (7) Battery (2) Air Vents (2) Bushings (1) Spark plugs (1) Bodywork (2) Key (2) Timing belt (3) V-belt (1) Air conditioning controls (1) -board computer (1) Checks and maintenance (12) Dashboard (6) Headlight (3) Tail light (1) Air filter (1) Cabin air filter (2) Diesel filter (2) Oil filter (1) Grille (1) Accessory Kit (3) Light bulb (5) Side turn signal light bulb (3) Headlight bulb (2) Rear light bulb (3) Interior lights ceiling light bulb (5) Antifreeze liquid (2) Dashboard light (1) License plate light (1) Handle (1) Engine oil (3) Door panel (3) Front bumper (1) Rear bumper (1) Brake pads (1) Hydraulic pistons (2) Gear Shift Knob (2) Instrument cluster (3) Passenger compartment heating radiator (1) Fuse box (4) Seat (2) Outside rearview mirror (5) Windscreen wipers (2) Thermostat (1) Central tunnel (1) Interior blower (1)

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos