Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the panoramic roof on the Volvo XC60

Model: Volvo Xc60 MK 2 - Years 2017-2026
Part: Warning light – error code

To reset the panoramic roof of the Volvo, we must first board the vehicle and immediately turn on the instrument panel. Then, press and hold the button on the roof of the car to fully open the panoramic roof, and then press and hold the button to close the sunroof. Repeat this operation twice in a row, then turn off and on the instrument panel to complete the reset operation on the vehicle. If the function continues to have issues, it may be necessary to replace the fuse.

Posted on 9 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Headlight of a Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Start by opening the trunk of your Volvo XC60, then remove the cover located on the inner side of the cargo area. Next, disconnect all the electrical…
How to Reset the Service Light on a Volvo XC60?
How to Reset the Service Light on a Volvo XC60?
Volvo Xc60 (2017-2026 / MK 2) Reset the Service light on a Volvo XC60 by connecting a diagnostic tool to the vehicle's OBD port, located just below the steering column. Once the s…
How to Reset the Service Light on the Volvo XC60?
How to Reset the Service Light on the Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) To reset the Service light on the Volvo XC60, insert the key into the ignition switch and turn it to position 1, which only powers the instrument clu…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos