Do it yourself
| ||||
|
Volvo Xc60 - Video tutorial
Model: Volvo Xc60
MK 2
- Years 2017-2024 The operation of resetting the Service light on the Volvo XC60 is done by connecting a diagnostic tool to the OBD port of the vehicle, which is located immediately below the steering column. Once the scanner is connected, it will be necessary to select the model of the car in question and the corresponding version. Then, follow the instructions in the tutorial so that the maintenance interval is properly restored. After the reset operation is complete, the scanner can be disconnected and the instrument panel turned off.
Posted on 8 April 2023 by ScegliAuto
|
Frequently Asked QuestionsHandbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |