Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Volvo XC60?

Model: Volvo Xc60 MK 1 - Years 2008-2016
Part: Service warning light

To reset the Service light on a Volvo XC60, press and hold the TRIP button located on the right side of the instrument cluster while it is off. Continue holding the button and insert the ignition key into the ignition switch, then press the start button: you will notice that after a few seconds, the Service light will disappear from the instrument cluster. To verify that the reset was successful, turn off and then completely restart the instrument cluster.

Updated on 22 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Volvo XC60?
How do you reset the Service light on the Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) The Service light of the Volvo XC60 can be reset by inserting the key into the ignition switch, turning on the instrument panel with the button, and …
How to Reset the Service Light on a Volvo XC60?
How to Reset the Service Light on a Volvo XC60?
Volvo Xc60 (2017-2026 / MK 2) To reset the Service light on a Volvo XC60, turn on the ignition and navigate through the menu using the left lever and the OK button. Select the T2 …
How to Reset the Service Light on a Volvo XC60?
How to Reset the Service Light on a Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) To reset the Service light on a Volvo XC60, turn on the ignition and then connect a diagnostic tool to the vehicle's OBD port. This port is located o…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos