Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the remote battery for the Volvo XC60?

Model: Volvo Xc60 MK 1 - Years 2008-2016
Part: Key

Video tutorial
Detailed instructions - In this tutorial, you can see how to replace the remote battery for the Volvo XC60, a very simple and quick operation. For this, you will need a small flathead screwdriver and a replacement battery of type CR2430. First, extract the metal emergency key by pressing the designated button, then insert the screwdriver into the indicated slot, pry it open, and unlock the rear cover. Next, remove the old battery, insert the replacement while ensuring the correct polarity, and reassemble everything by following the reverse procedure.

Posted on 21 July 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery in a Volvo XC60?
How to Replace the Remote Battery in a Volvo XC60?
Volvo Xc60 (2017-2026 / MK 2) In this tutorial, you will see how to replace the remote battery in a Volvo XC60, an extremely simple and quick operation. For this, you will need a …
Disassemble Volvo XC60 Key
Disassemble Volvo XC60 Key
Volvo Xc60 (2008-2016 / MK 1) How do you disassemble the key for the Volvo XC60? Let's look at disassembling the plastic parts of the key and replacing the battery. Take your remo…
How to Replace the Key Fob Battery in a Volvo XC60?
How to Replace the Key Fob Battery in a Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) If the key fob for your Volvo XC60 stops working due to a dead battery, simply replace it by following this easy guide, which also applies to other V…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Citroën DS4?

The tyre pressure warning light on the Citroën DS4 can be reset by inflating the tyres until they reach the corresponding pressure value, which is indicated on the sticker attached to the driver's door pillar. Once all tyres are at this value, turn on the ignition by inserting the key into the ignition switch; this should make the warning light disappear from the dashboard. If it does not reset, start the engine and drive to allow the sensors to read the new values.

Watch the video!


by ScegliAuto

More videos