Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the "Service" Light on a Volvo XC60?

Model: Volvo Xc60 MK 1 - Years 2008-2016
Part: Service warning light

Hello, today's guide aims to reset the "Service" light on your Volvo XC60. Before starting, ensure you have performed the recommended maintenance. Begin by sitting in the driver's seat. Next, turn on the ignition by turning the key in the ignition switch. Once done, press and hold the reset button located under the speedometer. Keep it pressed until the "Service" light disappears. When the "Service" light is no longer present on your Volvo XC60's dashboard, you can release the reset button, and you will have successfully completed the procedure.

Updated on 18 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the maintenance service reminder on the Volvo XC60
How to reset the maintenance service reminder on the Volvo XC60
Volvo Xc60 (2017-2026 / MK 2) Today we will discover the information that will allow us to reset the regular maintenance warning (service) on the Volvo XC60. First, we get into th…
How to reset the "Service" light on a Volvo XC60?
How to reset the "Service" light on a Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) To reset the "Service" light on a Volvo XC60, start by turning on the instrument panel without starting the engine. Make sure the brake pedal is not …
Resetting Maintenance Reminder on Volvo XC60
Resetting Maintenance Reminder on Volvo XC60
Volvo Xc60 (2017-2026 / MK 2) Let's go over the steps needed to reset the maintenance reminder on the Volvo XC60. First, get in the vehicle and press and hold the reset button loc…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos