Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the gear knob of the Volvo S40.

Model: Volvo S40 MK 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Shift knob

See other generations:
Video tutorial

If you want to remove the gear knob located inside the cabin of your second-generation Volvo S40 by yourself, you should first carefully read the following guide and then apply the various steps described. First, get into the car and make sure it is turned off, then shift your attention to the gear lever and detach the plastic located underneath the knob.

Once you have done this, grasp the knob and pull it forcefully upwards until it is completely removed. At this point, the procedure is successfully completed, and you can proceed to install a new gear knob if desired.


Posted on 16 December 2025 by ScegliAuto


Related tutorials

Removing the automatic gear knob of the Volvo S40
Removing the automatic gear knob of the Volvo S40
Volvo S40 (2004-2012 / MK 2) These brief and simple instructions will show you how to remove and replace the automatic gear knob of the Volvo S40. First, get into the vehicle and…
Removing Gear Knob on Volvo S40, C30, V50
Removing Gear Knob on Volvo S40, C30, V50
Volvo S40 (2004-2012 / MK 2) In this short video tutorial, you will learn how to remove and replace the gear knob on various Volvo models such as the S40, C30, and V50 in simple …
How to remove the cover of the central console of the Volvo S40
How to remove the cover of the central console of the Volvo S40
Volvo S40 (2004-2012 / MK 2) Below we will see the instructions that will allow us to disassemble and replace the plastic partition of the central console of the Volvo S40. First…

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos