Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset of the service light for the Volvo XC70.

Model: Volvo Xc70 MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Service warning light

See other generations:
Video tutorial

Below we will see the instructions on how to reset the service light for the regular maintenance of the engine oil change for the Volvo XC70. First, let's get inside the vehicle and start pressing and holding the reset button located at the bottom right of the instrument panel; then we turn on the instrument panel, waiting for the yellow service light to flash three times to completely reset it, as shown in the video.

At this point, we turn off the instrument panel and start the engine to complete the service reset operation!


Posted on 7 January 2026 by ScegliAuto


Related tutorials

Resetting the Service Light on the Volvo XC70
Resetting the Service Light on the Volvo XC70
Volvo Xc70 (2007-2016 / MK 3) Below are the instructions for resetting the service and regular maintenance light on the Volvo XC70. First, get in the vehicle and turn on the ignit…
How to Reset the Service Light on a Volvo XC70?
How to Reset the Service Light on a Volvo XC70?
Volvo Xc70 (2007-2016 / MK 3) On the Volvo XC70, the procedure to reset the Service light involves pressing the button located on the right side of the instrument cluster: while h…
Reset of the service light for the Volvo XC70
Reset of the service light for the Volvo XC70
Volvo Xc70 (2007-2016 / MK 3) In this guide, we will look at the information that will allow us to reset the ordinary maintenance warning (service) of the Volvo XC70. First, let's…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos