Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Turn Signal Bulb in the Front Headlight of the Volvo XC90

Model: Volvo Xc90 MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Headlight bulb

See other generations:
Video tutorial

Today's instructions will allow you to disassemble and replace the turn signal bulb in the front headlight of the Volvo XC90. First, open the hood of the vehicle and start removing the headlight by unscrewing the mounting screws and disconnecting the electrical connector found at the back; then remove the plastic cover protecting the bulbs, taking out the faulty bulb if necessary, as shown in the video.

At this point, install the new turn signal bulb of the correct type and with the same base; reassemble the headlight assembly to complete the operation!


Posted on 1 March 2026 by ScegliAuto


Related tutorials

Replacing the Front Turn Signal Bulb on a Volvo XC90
Replacing the Front Turn Signal Bulb on a Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) The step-by-step instructions in this guide will show you how to remove and replace the front turn signal bulb on a Volvo XC90. First, open the vehic…
How to Replace the Headlight Bulb on a Volvo XC90
How to Replace the Headlight Bulb on a Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) If you own a first-generation Volvo XC90 (2002-2014) and want to replace the headlight bulb yourself, follow these steps. First, turn off the vehicle…
Replacing Side Marker Light Bulb
Replacing Side Marker Light Bulb
Volvo Xc90 (2002-2014 / MK 1) Here are a few simple steps to replace the side marker light bulb on your Volvo XC90. At the bottom of the side light assembly, there is a small slot…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos