Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Turn Signal Bulb on a Volvo XC90

Model: Volvo Xc90 MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Light bulb

See other generations:
Video tutorial

The step-by-step instructions in this guide will show you how to remove and replace the front turn signal bulb on a Volvo XC90. First, open the vehicle's hood and start unscrewing the screws securing the headlight assembly, disconnecting the electrical connector for the bulbs to remove it. Then, remove the plastic protective cover and disconnect the turn signal bulb connector, as shown in the video.

At this point, replace and install the new turn signal bulb with the same fitting, and finally reassemble the headlight assembly!


Updated on 29 October 2026 by ScegliAuto


Related tutorials

Replacement of the timing belt of the Volvo XC90
Replacement of the timing belt of the Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) Today's instructions will allow us to disassemble and replace the timing belt of the Volvo XC90. First, we open the hood of the vehicle and start by …
Replacing the Radiator on a Volvo XC90
Replacing the Radiator on a Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) In today's tutorial video, you will learn how to remove and replace the cooling radiator on a Volvo XC90, following the instructions below. First, li…
Where to Find the Fuse Box in the Volvo XC90
Where to Find the Fuse Box in the Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) To locate the fuse box inside your first-generation Volvo XC90 (year 2002-2014), follow these simple steps. First, reach the driver's seat and leave …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos