Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the timing belt of the Volvo XC90

Model: Volvo Xc90 MK 2 - Years 2015-2026
Part: Timing belt

Today's instructions will allow us to disassemble and replace the timing belt of the Volvo XC90. First, we open the hood of the vehicle and start by removing the engine support on the distribution side; then we lift the vehicle and remove the front right wheel and the crankshaft pulley, disconnecting the V-belt, as shown in the video. At this point, we remove the distribution cover, taking the necessary references for the replacement of the timing belt; we install the original one, reassembling all the other components.

Posted on 2 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the timing belt of the Volvo XC90 2.4L
Guide to replacing the timing belt of the Volvo XC90 2.4L
Volvo Xc90 (2002-2014 / MK 1) In this guide we will see the instructions for replacing the timing belt of the Volvo XC90 with a 2.4L engine; the manufacturer indicates that the ti…
How and When to Replace the Timing Belt on the Volvo XC90
How and When to Replace the Timing Belt on the Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) Today, let's go over the procedure and instructions on how and when to remove and replace the timing belt on the Volvo XC90. For the diesel engine, t…
Guide to replacing the timing belt of the Volvo XC90
Guide to replacing the timing belt of the Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) Today we will see the instructions that will allow us to dismantle and replace the timing belt of the Volvo XC90 (D5 Diesel engine); the manufacturer…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos