Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the drive belt in the Volvo C30?

Model: Volvo C30 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: V-belt

Video tutorial

In this tutorial we can see how to replace the serpentine belt in the Volvo C30, a very simple operation. First of all, we lift the front right side of the vehicle, taking all necessary safety measures, then we remove both the wheel and the inner cover of the wheel arch.

We then grab the tensioner with a Torx T40 key, rotate it downwards to release the tension and remove the old belt. At this point, all that remains is to position the replacement in the same way, following the pattern, and reassemble everything following the reverse procedure.


Posted on 20 October 2025 by ScegliAuto


Related tutorials

Replacing the Timing Belt on the Volvo C30
Replacing the Timing Belt on the Volvo C30
Volvo C30 (2006-2013 / MK 1) In this guide, follow the instructions necessary for removing and replacing the timing belt on the Volvo C30. First, lift the vehicle and loosen the …
How to Replace the Timing Belt on a Volvo C30?
Volvo C30 (2006-2013 / MK 1) To replace the timing belt on a Volvo C30, open the bonnet to access the left side of the engine block: here you will find the cover under which the …
How to Replace the Timing Belt on a Volvo C30
How to Replace the Timing Belt on a Volvo C30
Volvo C30 (2006-2013 / MK 1) To replace the timing belt on a Volvo C30, first remove the bolts securing the right front wheel, allowing it to be taken off along with the inner co…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos