Do it yourself
Frequently asked questions about cars and motorcycles

Guide to Replacing the Serpentine Belt on the Volvo 400

Model: Volvo 400 MK 1 - Years 1987-1997
Part: V-belt

The main instructions in this guide will show you how to remove and replace the serpentine belt on the Volvo 400. First, open the cabin to access the upper part of the engine; then disconnect the tensioner, thus removing the serpentine belt from the various pulleys, as shown in the video. At this point, install the new serpentine belt in the correct direction, as well as the original one, ensuring it is correctly seated (by slowly turning the engine); lower the cabin again and start the engine, completing the replacement operation.

Posted on 16 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Volvo 400 (1987-1997 / MK 1) In this brief guide, discover how to access the internal fuse box of the Volvo 440 and 400. First, get into the cabin and start by removing the plast…
Volvo 400 (1987-1997 / MK 1) The cigarette lighter sockets on the Volvo 460 are increasingly used to power small electronic devices, exposing them to the risk of overload, which …

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos