Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the timing belt of the Volvo XC90

Model: Volvo Xc90 MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Timing belt

See other generations:
Video tutorial

Today we will see the instructions that will allow us to dismantle and replace the timing belt of the Volvo XC90 (D5 Diesel engine); the manufacturer declares that the timing belt replacement should be done every ten years or 180,000 kilometers. So we open the hood of the car and start dismantling and removing the tray we find on the left side of the engine compartment; then we remove the distribution cover and disconnect the V-belt, as shown in the video.

At this point, we take the necessary references for the replacement of the timing belt, replacing the water pump if necessary, following the instructions in the video until the end!


Posted on 12 February 2025 by ScegliAuto


Related tutorials

Guide to replacing the timing belt of the Volvo XC90 2.4L
Guide to replacing the timing belt of the Volvo XC90 2.4L
Volvo Xc90 (2002-2014 / MK 1) In this guide we will see the instructions for replacing the timing belt of the Volvo XC90 with a 2.4L engine; the manufacturer indicates that the ti…
Guide to Replacing the Timing Belt on the Volvo XC90 2.4D
Guide to Replacing the Timing Belt on the Volvo XC90 2.4D
Volvo Xc90 (2002-2014 / MK 1) Today's information will show the steps for replacing the timing belt on the Volvo XC90 2.4D. First, open the hood and remove the upper plastic cover…
How and When to Replace the Timing Belt on the Volvo XC90
How and When to Replace the Timing Belt on the Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) Today, let's go over the procedure and instructions on how and when to remove and replace the timing belt on the Volvo XC90. For the diesel engine, t…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos