Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Side Marker Light Bulb

Model: Volvo Xc90 MK 1 - Years 2002-2014
Part: Side marker bulb

Here are a few simple steps to replace the side marker light bulb on your Volvo XC90. At the bottom of the side light assembly, there is a small slot to insert a flathead screwdriver to release the retaining clip. Pull out the light assembly, turn the socket counterclockwise, and remove the burnt-out bulb. Insert a new T10 orange bulb, place the socket back in its position, and turn it clockwise. Reinstall the light assembly. With these simple steps and a small screwdriver, you have avoided a trip to your trusted auto electrician.

Updated on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Fog Light Bulb on Volvo XC-90
Replacing Front Fog Light Bulb on Volvo XC-90
Volvo Xc90 (2002-2014 / MK 1) In this tutorial video, you will learn how to remove and replace the front fog light bulb on a Volvo XC-90. First, lift the vehicle and access the ba…
Replacing Front Fog Light
Replacing Front Fog Light
Volvo Xc90 (2002-2014 / MK 1) To facilitate disassembly, it is recommended to lift the vehicle on a hoist: the fog light bulb is accessed from inside the bumper. Disconnect the co…
How to Replace the Side Mirror Bulb for the Volvo XC90?
How to Replace the Side Mirror Bulb for the Volvo XC90?
Volvo Xc90 (2002-2014 / MK 1) To replace the side mirror bulb for the Volvo XC90, use a tool to pry off the corresponding mirror cap: once the cap is removed, disconnect the light…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos