Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Fog Light Bulb on Volvo XC-90

Model: Volvo Xc90 MK 1 - Years 2002-2014
Part: Light bulb

In this tutorial video, you will learn how to remove and replace the front fog light bulb on a Volvo XC-90. First, lift the vehicle and access the back of the fog light; then disconnect the electrical connector from the bulb and remove the bulb by turning it counterclockwise, also pulling out the socket. At this point, remove the bulb from the socket and replace it with a new one of the correct type (in this case, H1 type). Finally, reinstall the bulb into the socket and reassemble everything!

Updated on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front turn signal bulb on the Volvo XC90
Replacement of the front turn signal bulb on the Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) The step-by-step instructions in this guide will show us how to disassemble and replace the turn signal bulb of the front headlight of the Volvo XC90…
How to Replace the Turn Signal Bulb in the Front Headlight of the Volvo XC90
How to Replace the Turn Signal Bulb in the Front Headlight of the Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) Today's instructions will allow you to disassemble and replace the turn signal bulb in the front headlight of the Volvo XC90. First, open the hood of…
Rear Tail Light Bulb Replacement
Rear Tail Light Bulb Replacement
Volvo Xc90 (2002-2014 / MK 1) To replace the rear tail light bulb, open the trunk, lift the support panel, and remove the side carpet cover located just behind the tail light by p…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos