Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Rear Tail Light Bulb Replacement

Model: Volvo Xc90 MK 1 - Years 2002-2014
Part: Tail light bulb

To replace the rear tail light bulb, open the trunk, lift the support panel, and remove the side carpet cover located just behind the tail light by pulling it from the bottom. At this point, unscrew the two retaining screws of the tail light (which are elongated hexagonal in shape) and remove it from its housing. Disconnect the socket and extract the old bulb (bayonet type), clean the electrical contacts with appropriate spray, install the new bulb, reconnect the socket, and reposition the tail light. Reinstall the retaining screws and reattach the covers that were previously removed.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Tail Light on a Volvo XC90?
How to Replace the Tail Light on a Volvo XC90?
Volvo Xc90 (2002-2014 / MK 1) To replace the tail light on a Volvo XC90, open the trunk and lift the carpet to detach the internal cover corresponding to the light to be removed. …
Replacement of the rear fog light bulb of the Volvo XC 90 MK2
Replacement of the rear fog light bulb of the Volvo XC 90 MK2
Volvo Xc90 (2015-2026 / MK 2) The rear fog light mounted on the Volvo XC 90 proves to be useful for signaling our presence to the cars following us, especially on foggy days. Ther…
Replacing Front Fog Light Bulb on Volvo XC-90
Replacing Front Fog Light Bulb on Volvo XC-90
Volvo Xc90 (2002-2014 / MK 1) In this tutorial video, you will learn how to remove and replace the front fog light bulb on a Volvo XC-90. First, lift the vehicle and access the ba…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos