Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Tail Light on a Volvo XC90?

Model: Volvo Xc90 MK 1 - Years 2002-2014
Part: Tail light

To replace the tail light on a Volvo XC90, open the trunk and lift the carpet to detach the internal cover corresponding to the light to be removed. Remove all screws found inside the previously covered area and disconnect the connectors. Then, unclip the plastic part under the light and disconnect the underlying connector. At this point, the light can be detached and removed from its housing. The new light should be secured with the appropriate bolts and connected to the connectors.

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a Volvo XC90
How to Replace the Headlight Bulb on a Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) If you own a first-generation Volvo XC90 (2002-2014) and want to replace the headlight bulb yourself, follow these steps. First, turn off the vehicle…
How to disassemble the rear light of the Volvo XC90
How to disassemble the rear light of the Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) Today's instructions will show us how to disassemble and replace the rear light and its bulbs on the Volvo XC90. First, let's open the rear hatch of …
How to Replace the Turn Signal Bulb in the Front Headlight of the Volvo XC90
How to Replace the Turn Signal Bulb in the Front Headlight of the Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) Today's instructions will allow you to disassemble and replace the turn signal bulb in the front headlight of the Volvo XC90. First, open the hood of…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos