Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the rear fog light bulb of the Volvo XC 90 MK2

Model: Volvo Xc90 MK 2 - Years 2015-2026
Part: Tail light bulb

The rear fog light mounted on the Volvo XC 90 proves to be useful for signaling our presence to the cars following us, especially on foggy days. Therefore, it is important to replace the bulb of the spotlight if it burns out. To do this, position yourself in front of the spotlight using a plastic lever to avoid scratching the surfaces, lever on the right edge to remove the headlight and be able to remove it. Rotate the bulb holder to remove it, remove the old bulb and replace it with a new H21W, insert the bulb holder again and put the headlight back in place.

Posted on 8 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Fog Light Bulb on Volvo XC-90
Replacing Front Fog Light Bulb on Volvo XC-90
Volvo Xc90 (2002-2014 / MK 1) In this tutorial video, you will learn how to remove and replace the front fog light bulb on a Volvo XC-90. First, lift the vehicle and access the ba…
Replacement of the front turn signal bulb on the Volvo XC90
Replacement of the front turn signal bulb on the Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) The step-by-step instructions in this guide will show us how to disassemble and replace the turn signal bulb of the front headlight of the Volvo XC90…
Replacement of the rear wiper blade of the Volvo XC90 1
Replacement of the rear wiper blade of the Volvo XC90 1
Volvo Xc90 (2002-2014 / MK 1) If the rear wiper blade of the Volvo XC 90, when activated, leaves dirty areas on the glass, it is good practice to replace it to ensure good rear vi…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos