Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Side Mirror Bulb for the Volvo XC90?

Model: Volvo Xc90 MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Side marker bulb

See other generations:
Video tutorial

To replace the side mirror bulb for the Volvo XC90, use a tool to pry off the corresponding mirror cap: once the cap is removed, disconnect the light fixture on the mirror and pull out the bulb inside. This bulb must be disconnected from the connector, to which the new one will be connected: the new bulb will then be inserted back into the light fixture, which will be reattached to the mirror.

Finally, cover everything by reinstalling the corresponding cap.


Updated on 18 June 2026 by ScegliAuto


Related tutorials

Removing the Mirror from a Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) Is the mirror mounted on a Volvo XC90 to be replaced? Let's see how to do it. Pry between the perimeter of the mirror frame and the mirror glass itse…
How to Replace the Exterior Rearview Mirror on a Volvo XC90
How to Replace the Exterior Rearview Mirror on a Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) To replace the exterior rearview mirror on a Volvo XC90, loosen the screws that secure the door panel to its housing so that it can be removed. Once …
Replacing the Front Turn Signal Bulb on a Volvo XC90
Replacing the Front Turn Signal Bulb on a Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) The step-by-step instructions in this guide will show you how to remove and replace the front turn signal bulb on a Volvo XC90. First, open the vehic…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos