Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Mirror from a Volvo XC90

Model: Volvo Xc90 MK 1 - Years 2002-2014
Part: Side mirror

Is the mirror mounted on a Volvo XC90 to be replaced? Let's see how to do it. Pry between the perimeter of the mirror frame and the mirror glass itself (use a plastic pry tool). Pry until the plastics holding the mirror detach from the mirror assembly (disconnect the power wire). Unscrew the screws with a screwdriver to detach the mirror cover, and replace the damaged part with the new one. Be careful to engage the plastic clips into the mirror supports. Adjust the mirror.

Updated on 17 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Side Mirror Bulb for the Volvo XC90?
How to Replace the Side Mirror Bulb for the Volvo XC90?
Volvo Xc90 (2002-2014 / MK 1) To replace the side mirror bulb for the Volvo XC90, use a tool to pry off the corresponding mirror cap: once the cap is removed, disconnect the light…
How to Replace the Exterior Rearview Mirror on a Volvo XC90
How to Replace the Exterior Rearview Mirror on a Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) To replace the exterior rearview mirror on a Volvo XC90, loosen the screws that secure the door panel to its housing so that it can be removed. Once …
How to install the dash cam on the Volvo XC90
How to install the dash cam on the Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) In this guide we will see the main information related to installing the dash cam on the Volvo XC90, in simple steps. First of all, let's get the das…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos