Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. V40
    4. : How to reset the 2019 Volvo V40 service light

Volvo V40 - Video tutorial

Model: Volvo V40 MK 2 - Years 2012-2019
Part: Instrument cluster
Operation: How to reset the 2019 Volvo V40 service light

The procedure necessary to be able to reset the service warning light of your Volvo V40 Mk2 (year 2019) is very simple and you can complete it in a few minutes by following the instructions described below. First, go inside the car and make sure the car is off. Then hold down both the power button and the "OK" button at the same time and start the instrument cluster. As soon as the service light stops flashing, release both buttons and switch off the ignition. Finally, turn it back on to complete the reset procedure.


Posted on 23 December 2022 by ScegliAuto

    Frequently Asked Questions

    • V40 1995-2012 - Why doesn't the ignition on my Volvo V40 come on? Read Answer
    • V40 2012-2019 - What to do when the Volvo V40 engine light comes on? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos