Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Volvo V40?

Model: Volvo V40 MK 2 - Years 2012-2019
Part: Service warning light

On the Volvo V40, resetting the Service light is done by turning on the instrument panel by turning the key and then holding down the OK button located at the end of the lever to the left of the steering wheel. This will cause a red light to start flashing, and when it disappears completely, you will need to turn off the instrument panel. At this point, turn it back on, confirming that the Service light has disappeared from the instrument panel. To verify that the reset has occurred correctly, simply turn off and then turn on the panel again.

Updated on 25 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the Service light on the Volvo V40?
How to reset the Service light on the Volvo V40?
Volvo V40 (2012-2019 / MK 2) To reset the Service light on the Volvo V40, turn the ignition on by rotating the key. Then, press and hold the OK button located at the end of the l…
How do you reset the Service light of the Volvo V40?
How do you reset the Service light of the Volvo V40?
Volvo V40 (2012-2019 / MK 2) You can completely remove the Service light from the instrument panel of the Volvo V40 by first turning on the instrument panel, turning the key, and…
How to reset the Service light on a Volvo V40?
How to reset the Service light on a Volvo V40?
Volvo V40 (2012-2019 / MK 2) To reset the Service light on a Volvo V40, turn on the instrument cluster by turning the key, then press and hold the OK button located at the end of…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos