Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Volvo XC60?

Model: Volvo Xc60 MK 1 - Years 2008-2016
Part: Service warning light

In this tutorial, you will learn how to reset the service light on a Volvo XC60, a very simple and quick operation to perform only after completing all required scheduled maintenance tasks. Start by entering the cabin, then insert the key but leave it in the initial position. Next, press and hold the button located to the right of the dashboard, turn on the instrument cluster at the same time, and keep the button pressed until the yellow "i" on the dashboard stops flashing. Then restart the vehicle and check that the reset was successful.

Updated on 21 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Volvo XC60?
How to Reset the Service Light on a Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) To reset the Service light on a Volvo XC60, turn on the ignition and then connect a diagnostic tool to the vehicle's OBD port. This port is located o…
How to Reset the Service Light on the Volvo XC60?
How to Reset the Service Light on the Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) To reset the Service light on the Volvo XC60, insert the key into the ignition switch and turn it to position 1, which only powers the instrument clu…
How to Reset the "Service" Light on a Volvo XC60?
How to Reset the "Service" Light on a Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) Hello, today's guide aims to reset the "Service" light on your Volvo XC60. Before starting, ensure you have performed the recommended maintenance. Be…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos