Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial we can see how to replace the front brake pads on the Yamaha NMAX 155 scooter, an extremely simple and quick operation. First of all, position yourself in front of the brake in question, then unscrew the two pins using a Torx T50 key. Then unscrew the caliper mounting bolts with a socket wrench, separate it from the fork and remove the old pads. At this point, all that remains is to clean any dirt residue present, insert the replacement pads and reassemble everything following the exact reverse procedure.

Posted on 1 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in the Yamaha NMAX 155 Scooter?
How to Replace the Battery in the Yamaha NMAX 155 Scooter?
Nmax 155 In this tutorial, you will see how to replace the battery in the Yamaha NMAX 155 scooter, an extremely simple and quick operation. First, ensure that…
How to replace the engine oil in the Yamaha NMAX 155 scooter?
How to replace the engine oil in the Yamaha NMAX 155 scooter?
Nmax 155 In this tutorial we can see how to replace the engine oil in the Yamaha NMAX 155 scooter, an extremely simple and fast operation. First of all, make …
How to Access the Fuse Box of the Yamaha Nmax 155
How to Access the Fuse Box of the Yamaha Nmax 155
Nmax 155 Today, discover the instructions that will allow you to access the fuse box of the Yamaha Nmax 155 scooter in simple and quick steps. First, place th…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos