Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Aerox
Part: Engine oil

To change the oil of a Yamaha Aerox, start by warming up the engine for a few minutes to make the oil more fluid. Turn off the engine and place the scooter on the center stand to ensure stability. Locate the oil drain plug under the engine. Place a collection tray under the plug and unscrew it with a suitable wrench, allowing the used oil to drain completely. After the oil has been drained, screw the drain plug back in and make sure it is tightened securely. Find the oil fill plug, usually located on the side of the engine. Remove the plug and, using a funnel, slowly pour the recommended amount of new oil as indicated in the owner's manual. Once the oil has been filled, replace the fill plug and tighten it securely. Start the engine and let it run for a few minutes, then turn it off and check for any oil leaks.

Posted on 21 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to change the motor oil of a Yamaha Aerox?
How to change the motor oil of a Yamaha Aerox?
Aerox To change the motor oil of a Yamaha Aerox, start by warming up the engine for a few minutes to make the oil more fluid, then turn it off. Place the s…
How to replace the engine oil in the Yamaha Aerox 155 scooter?
How to replace the engine oil in the Yamaha Aerox 155 scooter?
Aerox In this tutorial we can see how to replace the engine oil in the Yamaha Aerox 155 scooter, an extremely simple and fast operation. First of all, we w…
How to replace the engine oil in the Yamaha Aerox scooter?
Aerox In this tutorial we can see how to replace the engine oil in the Yamaha Aerox scooter, an extremely simple and quick operation. First of all, make su…

How to replace the coolant in the BMW S1000 R

Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid!

Watch the video!


by ScegliAuto

More videos