Do it yourself
Frequently asked questions about cars and motorcycles

How do you replace the motor oil of the Yamaha Xmax 300?

Model: Yamaha Xmax 300
Part: Engine oil

Video tutorial

The oil change on the Yamaha Xmax 300 can be done by loosening the drain plug located on the lower left side of the motorcycle, next to the stand. By unscrewing the plug, it will be possible to drain the used oil into a properly positioned container.

Once the oil has completely drained, the plug should be closed and the screws securing the casing containing the oil filter, located just above, should be loosened. After the oil filter has been replaced, the new oil can be inserted through the hole in the casing located above the drain.


Posted on 5 June 2025 by ScegliAuto


Related tutorials

Xmax 300 To change the engine oil on the Yamaha Xmax 300, loosen the drain plug located at the bottom left of the bike, next to the stand. Unscrewing the plug…
Xmax 300 Today we will explain how to check the engine oil level of the Yamaha Xmax 300. To perform this operation, we need to start the engine of our motorcy…
Xmax 300 To change the engine oil on the Yamaha Xmax 300, you need to loosen the drain plug located at the bottom left of the bike, next to the stand. Opening…

How to Set the Clock on the Yamaha Xmax 300?

On the Yamaha Xmax 300, you can adjust the clock by turning on the instrument panel, inserting the key into the ignition switch. Once the panel is powered, press and hold the button located on the right side of the handlebars, just below the red button. You will notice the hours start to flash, and you can change them by repeatedly pressing the same button. After a few seconds, the minutes will also start to flash, which can be adjusted using the same method.

Watch the video!


by ScegliAuto

More videos