Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Aerox
Part: Brake pads

In order to replace the front brake pads of the Yamaha Aerox, you need to loosen the screws that secure the brake caliper to the corresponding front wheel: once the brake caliper has been removed, it will be possible to completely detach it from the disc. You will need to remove the pin that locks the pads in place so that they can be removed from their housing: the new pads can then be inserted by positioning the caliper on the disc. After installing the caliper, you can verify that everything is functioning correctly.

Posted on 2 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on the Yamaha Aerox R?
How to Replace the Front Brake Pads on the Yamaha Aerox R?
Aerox In this tutorial, you will learn how to remove and replace the front brake pads, which also applies to the rear pads, on the Yamaha Aerox R scooter. …
How to Remove the Front Fairing of a Yamaha Aerox
How to Remove the Front Fairing of a Yamaha Aerox
Aerox Before you can start, head to the front side of your Yamaha Aerox scooter. Begin by unscrewing and removing the screws that secure the front fairing …
How to replace the grips on the Yamaha Aerox?
How to replace the grips on the Yamaha Aerox?
Aerox To replace the grips on the Yamaha Aerox, use a tool to pry off the weights located at the ends of the handlebars. Once both weights are removed, gra…

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos